OVIRAPTOR Ver.40
Oviraptor 1:16 Scale Model
Complete Model Series1:16
Print Time
48-96 hours
Component Count
23one
Support Requirements
Need
File Format
STL, OBJ, 3MF
Model Description
Misunderstood dinosaur: actually incubating eggs, not stealing them. Product ID 448. Ideal for museum education, collectible display, and scene building.
Key Features
- parrot-shaped beak
- Crown Ornament
- Incubation
- Feathered
Recommended Print Materials
PLAresin
📋 Printing Guide
Print Settings Recommendations
- • Layer Height: 0.2mm (PLA) / 0.15mm (Resin)
- • Fill rate: 15-20% (structural components: 25%)
- • Wall thickness: 1.2mm (3 layers)
- • Print Temperature: Adjust based on material
Assembly Instructions
- • Use model glue or UV glue for bonding
- • Sand joints for a smooth surface
- • Dry assembly can be performed first to verify fitment
- • Refer to the included assembly diagram
Post-processing Recommendations
- • Handle support removal carefully
- • Sand with 400-800 grit sandpaper
- • Primer-spraying compatible for enhanced adhesion
- • Acrylic or model paint recommended for coloring
Important Notes
- • For first-time printing, start with a small test size
- • Large parts: Ensure proper bed adhesion
- • Increase support density for slender parts
- • Ensure proper ventilation and protective gear when using resin printing